How to set up my Pulse?

Your Pulse electric bike arrives 95% assembled and only needs a few simple steps to be fully functional.

We recommend that you also review the User Manual and the assembly instructions contained therein. You can see the manual by clicking here .
Assembly instructions may vary a little depending on the generation: Rebel, Rebel X and Rebel X 2023. Below you will find a short video with general instructions.

For the assembly of the Rebel X 2023, you can rely on the instructions below the video and rely on the video where you need it. You'll be rolling in a matter of minutes

What you will need:

  1. Your ToolKit (you will find it in your welcome box).
  2. A friend to help you
  3. The pedals (you will find them in your welcome box).
  4. Lots of energy and good vibes.

Don't forget to register your Pulse before you start using it so that your warranty can take effect.
You have 30 days from when you receive your Pulse!

Instalación de manubrio en potencia

Si personalizaste tu Pulse con la suspensión de aire o buscas cambiar tu manubrio, los pasos a seguir son un poco distintos. Sigue las instrucciones a continuación para asegurar correctamente tu manubrio.

1. Locate the handlebars

Locate the handlebars on the side of your Pulse. Cut the white ties that tie it to the painting.

Make sure you only cut the white "wires."

2. Remove the stem cap

Using the Allen wrench that you will find in your welcome box, remove the cover, taking care not to loose the screws.

3. Place the Handlebar

Please position the handlebars so that the button panel is facing you, when sitting on your Pulse.

Make sure the handlebars are perfectly aligned (in the middle), and have the same amount of protrusion on both sides.

4. Tighten the screws

Firmly tighten the stem screws. Make a diagonal flow, slowly squeezing each one until they are perfectly tight.

5. Position your keypad and screen

With the help of your Allen keys, position the elements on your handlebars according to your comfort, turning them carefully.

6. Recheck your power

Otherwise they could come loose during your ride or damage the paint on the handlebars.