Constant care

Before each ride check:

  1. Battery: Check that you have locked your battery and that it is no longer connected to the charger. If you are going on a long trip, make sure you have enough charge.
  2. Brakes: Gently press both brakes to ensure they work properly. Inspect the brake pads for wear.
  3. Accelerator: With Pulse off, gently press the accelerator to ensure nothing is blocking it.
  4. Wheels: Lift your Pulse and check how your wheels turn. Make sure they roll straight and the discs do not rub against the brake pads.
  5. Tires: Make sure tires are inflated to the recommended pressure (30 psi) and inspect for any damage.
  6. Handlebars: Adjust the handlebars so that they are at the proper height and that they are secure under the insertion line. Also, make sure they are tightened tightly enough.
  7. Chain: Make sure your chain is free of dust and rust. If it rattles when using it, lubricate it.
  8. Nuts: Check the “Quick Release” mechanisms and any other levers or nuts are tight and in no danger of coming loose.
  9. Lights: Make sure the lights work.

Every 15 days, or every 100 kilometers of use, check:

  1. Check and adjust the front and rear brakes, checking by squeezing the brake levers to verify the current wear of the pads.
  2. Clean and inspect the frame.
  3. Clean and lubricate Pulse transmission. You can use wet towels for the transmission to remove debris from the chain, and grease with Teflon-based oil.