Unlock Top Speed
Your Pulse is factory-locked to have a maximum speed between 32 and 34 km/hr. However, at your own risk, you can unlock your electric bike to reach up to 45km/hr speed.
Rebel Og and X models
To unlock the C961 Display of your pulse bike, you must enter the display menu, for which you do the following:
- Turn on your Pulse.
- Press and hold the + and - button for 3 to 5 seconds until you see the screen change.
- Once in configuration mode you can change between the parameters to be modified with the power button.
- On the second screen you can make adjustments to the speed limit with its LSPd tracking, having the value of 35 as the factory value. Just use the "+" button to raise this parameter as much as you can to reach 45km/hr.
Rebel X 2023 Model
To unlock the Yolin Display of your Pulse Bike you must enter the display menu, for which you do the following:
- Press (i) to enter the parameter change status.
- Press +/- to select values
- Press (i) again to save the desired value and return to the general parameters menu.
To unlock the CloudDrive Display of your Pulse Bike you must enter the display menu, for which you do the following:
- Enter password 0007 , the screen will enter speed limit setting interface.
- The speed limit can be adjusted by clicking on the +/- buttons, to raise and lower the values ranging from 0 to 9, to be able to move from box to box, press the M button, for example to enter the code 0007, the buttons that would be pressed would be M,M,M and the + button until reaching the number 7.
- This will take you to the speed limit at which it is locked, again press the + button to reach the speed limit which is 45 km/h. To finish, press the M button to save and return to the initial screen of your Display.
The default speed limit is 20 MPH, which can be customized. The display may not be at the limit speed when it shows '--' . - You can also unlock the assisted level, it defaults to number 5. Like unlocking the speed limit, a password must be entered, in this case it would be 0606.
- The password will take you to the assistance level interface, with the +/- buttons you can increase or decrease the assistance level, it is configured at 5. The assistance levels range from 0 to 7.
- Press the M button to save and return to the main screen.
Ready, now you will have your pulse unlocked and ready to perform at full speed.