First Load

The Pulse arrives at its owner 60% charged. We recommend that before charging the battery, you use your new electric bicycle until the battery is almost completely empty (a single line remains on your display).
Later you must charge it completely. Plug your charger into any outlet in your house (110V) and let it fully charge for 5 to 8 hours (this is the only time the battery will need to be charged for that long).

First, locate the charger with its two components, connect them together and identify the connector that will match the input located on the battery on the front of it, under your seat. To discover it you will have to move the lid by gently sliding it to the side. Never try to remove it.

When you connect the connector to the power, it will indicate a green LED. Once you slide the connector protector, identify the 3 holes and match the 3 pins of the charger connector. Once this happens, carefully apply pressure between both terminals until they are connected. Once this is done, the LED will change to red, indicating that your battery is discharged and that charging is in progress correctly.

When your battery finishes its charging cycle, the LED will turn green again, at that moment disconnect the charger from your ebike and the process is finished.